Yamaha FX Cruiser HO Specifications
Yamaha FX Cruiser HO Specifications welcome to out web jetskitopspeed.com here we have best all think information like as: review, specs, price, top speed and horsepower. Hope you enjoy it have wonderful day. Yamaha Corporation of America FX ho Series consists of two cars, the FX cruiser Ho and FX ho. These are the same people actually WaveRunners except for a few cosmetic changes.When I came for testing, the first thing that caught my attention to lines and the redesigned front end; it has been more profile. I especially liked how they included wing mirrors the overall. The FX Ho has a low profile, a softer design, which in my opinion is more convenient for the sports more aggressive kind of knight. With a low profile and flatter FX ho seems to be called in business. I liked the Yamaha including wing mirrors the overall.
Before looking at what drives these nauticals through the water, we have to look at the seats, which turn out to be one of the differences between the FX cruiser Ho and the Ho FX. Both have a two-part seat design, with a stern and main section. The FX Ho has a low profile soft seat design that is best suited for a sporty riding style. The cruiser FX Ho on the other hand has more designed seating for comfort and support, with sections defined for the three riders and fully wavy back support. When the aft seat section is removed, the rider has access to the storage. With the storage bucket removed, there is access to the battery that can be easily removed and replaced. Also located in the area is the sump pump and exhaust/muffler components.
Yamaha FX Cruiser HO Design
Back in the driver’s seat is where a new important feature comes to play. On the starboard side of the console is the reversing lever, just where you would expect it, but this one is different. To operate, first squeeze the release handle and then pull the level back. The PwC is now in reverse and the bucket is deployed in front of the jet nozzle.
The characteristic is a mechanical neutral. Push the recoil lever forward and lock in place and the new view window on the lever will show a green “N “. The PwC is now in neutral. During my test, I left it in position for several minutes while I finished a few bottles of water. As announced, it was a neutral; I have not strayed forward or backward. By pressing the release handle and pushing the lever fully forward, you are now in the regular forward operation mode; A smart but simple solution.
Yamaha FX Cruiser HO Engine
The engine is connected via direct drive to the jet pump. What this means is that there is no transmission, no extra parts to go wrong or wear, and no reduction equipment. The drive shaft exits the motor and connects directly to the impeller that is encased in the jet pump unit. The impeller is stainless steel and has three blades with a release of 17.5 degrees that forces water out a 155m jet pump nozzle. The whole Jet pump unit is manufactured from an aluminum alloy which significantly reduces corrosion issues. The only non-metallic component is the reverse door.
By removing the section from the main seat, there is access to the beast’s belly–the engine compartment. The engine is a 4-cylinder high power marine 4-stroke engine, built on purpose and 1.8 L. This engine is naturally aspirated and tuned to run on regular 87 octane gasoline. There is a good amount of space around the engine and getting to the oil filter, the air filter, the spark plugs and most of all the components is quite easy.
The FX Ho series measurements in on 140.2 “(3.56 m) in length, have a beam of 48.4 ” and a height of also 48.4 “(1.23 m). Each version has a fuel tank 18.5 US gallon (70 L) but the weights are slightly different. The FX cruiser HO weighs 831 lbs (377 kg) and the FX HO weighs at 829 lbs (376 kg), but these are dry weights, so the weight of its operation will be just north of 938 lbs (425 kg).
Yamaha FX Cruiser HO Performance
In our test we recorded an average maximum speed of 62.6 mph at 7400 RPM while burning 13.6 Gal/h translates into 4.60 MPG for a range of 77 miles from the statute. Since there is no better cruise in a PwC, mainly because we did not drive them as boats, I found at 5000 rpm most of the time I gave an average speed of 32.6 mph, burning only 5.1 gallons for a range of approximately 107 miles of statute. We tested our time from 0 to 30 and recorded an average of 2.0 seconds.
As far as handling during the test, I noticed that the longer hull was a little more lenient than the shorter previous model. The new units become very aggressive when the rider wants to if in the power, but they are also easily controllable and more stable in less aggressive turns. Another thing I noticed was the smoothness of the walk. There is a softer transition when crossing awake and the hull throws water and sprays out to the sides, instead of hitting it in front submission.
Yamaha FX Cruiser HO Price
Okay, now you want to know how. Well, recommended for voyage is $13,599 FX ho ho FX and is $13,099. They are offered in pure white-Carbon black and metal or deep blue or black metal metal, respectively.
Yamaha FX Cruiser HO Specifications
- Available in pure white with electric green or metallic black with metallic slate blue
- NanoXcel Ultra-lightweight helmet and cover
- Hydro-Turf Rugs
- 4-cylinder, 4-stroke, 1.8-liter high performance Yamaha Marine Engine
- Cruiser seat
- Cruise Assist/No Wake mode
- Multifunction Instrumentation Panel
- Reembarkation Step
- Pull-back ride with traction control